How to Embroider Sweatshirt Sleeves: Beginners Tutorial

Have you ever thought about giving your sleeves a stylish twist with machine embroidery? 

Discover the creative options of machine embroidery on sleeves, adding personality to your clothing. This guide will show you how to add style to your sleeves using different methods depending on what equipment you have. We will also share versatile styling ideas.

Ready to roll up your sleeves and stitch your style?

Sleeve embroidery can jazz up a boring sweatshirt or sweater and add elegance to a crisp cotton shirt.  

You can place your embroidery design virtually everywhere, depending on the size and type. Still, considering how those viewing them will perceive them is best.

Check out our 30,000+ high-quality embroidery designs to embellish your next sweater perfectly.

If you have team spirit, you can place your favorite mascot on the outside shoulder, almost like a badge of honor. A longer saying or bigger letters can run down your arm vertically or horizontally.

If you have a meaningful quote or name (such as your kids or pets) you want to see all day while you work, place it on the inner forearm. You can also place a smaller logo or monogram near or on the cuff. Personalized sweatshirts also make great gift ideas!

Create your personalized name or sayings with your own embroidery software using our huge selection of embroidery fonts!

Want to create your own embroidery designs to personalize your garments easily? Check out our Design Doodler Software to easily turn your doodles into stitches without embroidery digitizing.

Placement is up to you; you can embroider on virtually every area of the sleeve.

Center the upper sleeve on the shoulder seam and let it run down the sleeve. You can align the lettering vertically or horizontally. People often get embroidery on their upper arm, from shoulder to elbow, to show it off on the side.

The orientation of the “inside” sleeve embroidery is between the center line of the sleeve and the seam under your arm. This places it so that you can see it when you look down.

Lower sleeve and upper sleeve placement are the same on the center line of the sleeve.

You can directly do cuff embroidery on the cuff or the bottom of the sleeve by the cuff. We will discuss the best way to do these narrower sleeve parts.

Let’s discuss the equipment you will need to create sleeve embroidery. Sleeves are long and skinny, so having a sleeve hoop is extremely handy if you’re embroidering lots of them. But we have some tricks “up our sleeve” to allow everyone to get great results, should you choose to use regular hoops.

• Seam ripper: great for removing the serged edge of sweatshirts (better than scissors to avoid cutting fabric by mistake).
• Marking chalk. 
• Ruler or measuring tape. 
• Embroidery stabilizer (use one of the following depending on the method you use).
  • No-show mesh
  • Sticky stabilizer
• An embroidery hoop (we’ll go over both methods to embroider using the two hoops below).
  • Sleeve hoop: long and skinny.
  • Regular hoop: great for cuffs and smaller areas; the hoop size depends on the size of the design.

The design placement on your sleeve can be anywhere.

We’ll discuss three different methods of embroidering on your sleeve below.

Start by finding the center point of your sleeve. We need to know this no matter where you place your embroidery.  

Lay out your garment folding on the center seam (align with the shoulder and underarm seam). 

Mark the center with pins or tape.

Open and flatten the sleeve and, using a ruler, put a mark (with chalk or water-soluble pen) between your two center points.

Turn your garment inside out. Combine medium cutaway stabilizer and no-show mesh. Attach them to your sleeve using temporary adhesive spray. (The cutaway is touching the sleeve fabric).

If you don’t have a sleeve hoop, don’t worry! Follow the steps in the cuff tutorial below – please note there is sewing involved.

Turn the garment inside out (the stabilizer should stay in place from the spray adhesive) and insert the hoop bottom into the sleeve.  

Center the hoop with the markings you made, and apply the top half of the hoop.

Insert your hooped sleeve into your embroidery machine and embroider.

Remove the hoop from your sleeve, and you’re done! That was easy!

These are two examples of what vertical and horizontal embroidery look like.

Don’t have a sleeve hoop? No problem, we can help you with that, too!

Sometimes, your embroidery hoop does not fit in your shirt sleeve. Perhaps you have a smaller sweater or bigger hoops. To start embroidery hooping, we will have to open the sleeve so we can get a hoop in – Please note there will be sewing involved.

Following the first few steps in the sleeve hoop method above. You will still want to center and outline where you’ll place your design. Use scissors or a seam ripper to remove stitches from the closest area to where you want to embroider.

You can easily remove serging by sliding the seam ripper through the stitches on the goodside.

Remember, you do not have to remove stitches in the whole arm! You just need a space large enough for your hoop to fit. Sometimes, you may not have to open the cuff.

Print a template of your design to help with proper placement.

Using our Echidna Hooping Station, we placed a piece of no-show mesh stabilizer below the sleeve fabric and hooped it.

Pin your template to your desired location.

Now that you know the exact location for your design make sure your starting needle lines up with the center of your design.

Put your embroidery hoop in your machine and let it stitch!

Now, close up your sleeve.

Fold your sweater so it is inside out. Use clips or pins to hold the seam together, and use your sewing machine (on a straight stitch) or serger to sew the gap shut.

Once you finish, turn your sweatshirt right side out.

Follow the same centering rules we discussed above. 

Flip your sleeve and cut open the part closest to where you’ll embroider the design using scissors or a seam ripper.

Remember embroidering a cuff can be thick. Watch out for that inside seam of the cuff, which can be a minimum of 3 layers of heavy material. A half to one inch above the cuff seam is ideal as a rule of thumb. For bigger logos, you can place higher. 

Pin the template of your design in the area you previously marked.

Use a sticky stabilizer and remove the paper to which you want your garment to stick.

Center the design of your template with your machine.

Using clips is an easy way to hold the side of your sleeve out of the way. 

Remove your template and pin, and let your design start stitching! Carefully watch to ensure that the needle does not hit your clips or sides of the sleeve.

Once you’ve finished embroidering, tear away the remainder of the sticky stabilizer and turn the sleeve inside. Sew the side of your sleeve back together.

Once you finish embroidering, sew the side of your sleeve back together, and voila, you finish!

Trying new things can be scary, but this tutorial should help you feel more comfortable. Remember these tips for embroidering sleeves.

• Know who is going to view this: you or others? An easy way to gauge is to create a template, place it on the sleeve, and view it in a mirror.
• If opening a sleeve, use a seam ripper to clip the top stitches of the serged edge.
• When embroidering near the cuff, avoid the cuff and sleeve seam.
• Practice on old garments until you feel comfortable hooping and stitching. When you’re comfortable, move on to your final garment stitches.

PS Check out our Embroidery Legacy Design Club to learn how to save on our 30,000+ quality designs and design fonts. Or, if you’ve never tried our designs, download our Free Embroidery Legacy Design Kit.